|
Product Details:
|
| Product Name:: | Ftth Ont | Typical Service:: | Broadband Internet Access, IPTV, VOD, CATV And Video Surveillance. |
|---|---|---|---|
| PON Interface:: | 1 GPON/EPON Port | Connector:: | SC/APC |
| Receiving Sensitivity:: | ≤-27dBm | Transmitting Optical Power:: | 0~+4dBm |
| LAN Interface:: | RJ45 | RF Frequency Range:: | 47~1000MHz |
| LED:: | Status Of POWER, LOS, PON, LAN, NORMAL, WARN | Power Supply:: | DC 12V/1A |
| Power Consumption:: | <3W | ||
| High Light: | CATV 1Ge FTTH ONT,FTTH ONT With RF Port,CATV 1Ge ftth ont modem |
||
Port Forwarding Loop Detection CATV 1Ge FTTH ONT With RF Port For Broadband Internet Access
Model NO:JZ-CX0101R001
Product Descriptions:
1GE+CATV is designed as HGU (Home Gateway Unit) in different FTTH solutions; the carrier-class FTTH application provides data service access. Based on mature and stable, cost-effective XPON technology. It can switch automatically with EPON and GPON mode when it access to the EPON OLT or GPON OLT. Adopts high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to meet the technical performance of the module of China Telecom EPON CTC3.0. Which is fully compliant with technical regulations such as ITU-T G.984.x and IEEE802.3ah. and designed by Realtek chipset 9601D.
Panel Light Instructions:
| Pilot | Status | Description |
| POWER | On | The device is powered up. |
| Off | The device is powered down. | |
| LOS | Blink | The device doses not receive optical signals. |
| Off | The device has received optical signal. | |
| PON | On | The device has registered to the PON system. |
| Blink | The device is registering the PON system. | |
| Off | The device registration is incorrect. | |
| LAN | On | Port is connected properly (LINK). |
| Blink | Port is sending or/and receiving data (ACT). | |
| Off | Port connection exception or not connected. | |
| NORMAL | On | Input optical power is between -18dBm and 2dBm |
| Off | Input optical power is higher than 2dBm or lower than -18dBm | |
| WARN | On | Input optical power is higher than 2dBm or lower than -18dBm |
| Off | Input optical power is between -18dBm and 2dBm |
Technnical specifications:
| Technical Item | Details |
| PON interface |
1 GPON/EPON port(EPON PX20+ and GPON Class B+) Upstream: 1310nm, Downstream: 1490nm SC/APC connector Receiving sensitivity: ≤-27dBm Transmitting optical power: 0~+4dBm Transmission distance: 20KM |
| LAN interface |
10/100/1000Mbps auto adaptive Ethernet interfaces. 10/100/1000M Full/Half, RJ45 connector |
| CATV Interface |
RF, optical power : +2~-18dBm Optical reflection loss: ≥45dB Optical receiving wavelength: 1550±10nm RF frequency range: 47~1000MHz, RF output impedance: 75Ω RF output level: ≥ 82dBuV(-7dBm optical input) AGC range: +2~-7dBm/-4~-13dBm/-5~-14dBm MER: ≥32dB(-14dBm optical input), ＞35(-10dBm) |
| LED | 6 LED, For Status of POWER, LOS, PON, LAN, NORMAL, WARN |
| Push-Button | 2, for Function of Power on/off, Reset |
| Operating condition |
Temperature : 0℃～50℃ Humidity :10%～90%(non-condensing) |
| Storing Condition |
Temperature : -40℃～+60℃ Humidity :10%～90%(non-condensing) |
| Power supply | DC 12V/1A |
| Power Consumption | <3W |
| Net Weight | <0.2kg |
|
|
|
Application
Ordering information:
| Product Name | Descriptions |
| 1GE+CATV XPON | 1*10/100/1000M Ethernet interface, 1 RF interface, 1 GPON interface, built-in FWDM, Input optical power -18dBm ～ +2dBm, support AGC function, Plastic casing, external power supply adapter |
Contact Person: Snow
Tel: +8615829774202
